Please wait a minute...
Chinese Journal of Engineering Design  2014, Vol. 21 Issue (1): 32-37    DOI: 10.3785/j.issn. 1006-754X.2014.01.006
    
Research on a bandwidth-limited active control system for commercial vehicle cab suspension based on the fuzzy theory
LEI Fei,YANG Hong-bo
State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body,Hunan University, Changsha  410082, China
Download: HTML     PDF(1660KB)
Export: BibTeX | EndNote (RIS)      

Abstract  A ten-degree-of-freedom mathematical model of a commercial vehicle including the cab was established. Based on fuzzy control theory, a bandwidth-limited active control system for the commercial vehicles cab suspension was designed. The vibrations of center of mass were investigated in directions of heave, pith and roll. The gain factor of fuzzy controller was optimized through genetic algorithm and the vibration was simulated using integral white noise random road as input.The results show that by employing the bandwidth-limited active control system proposed, the heave angular acceleration, pith angular acceleration and roll angular acceleration are distinctly reduced when compared with that adopted full floating suspension system. Meantime, the ride performance and comfortability of the commercial vehicle are improved.

Key wordsbandwidth-limited active control system      commercial vehicle cab      active suspension      fuzzy control     
Published: 28 February 2014
Cite this article:

LEI Fei,YANG Hong-bo. Research on a bandwidth-limited active control system for commercial vehicle cab suspension based on the fuzzy theory. Chinese Journal of Engineering Design, 2014, 21(1): 32-37.

URL:

https://www.zjujournals.com/gcsjxb/10.3785/j.issn. 1006-754X.2014.01.006     OR     https://www.zjujournals.com/gcsjxb/Y2014/V21/I1/32


基于模糊控制的商用车驾驶室悬置有限带宽主动控制系统研究

建立了含驾驶室的商用车十自由度整车数学模型,对安装了驾驶室有限带宽主动悬置的商用车进行模糊控制系统设计,该控制系统全面考虑了驾驶室质心处垂直、俯仰、侧倾方向振动,并采用遗传算法对模糊控制器增益因子进行优化.以积分白噪声随机路面输入作为激励进行振动仿真,仿真结果表明采用本文设计的驾驶室有限带宽主动悬置模糊控制系统相对全浮式悬置系统有效降低了驾驶室质心垂直、俯仰和侧倾加速度,一定程度上提高了商用车行驶平顺性和乘坐舒适性.

关键词: 有限带宽主动控制系统,  商用车驾驶室,  主动悬置,  模糊控制 
[1] DING Shu-yong, ZHANG Zheng, DING Wen-jie, LIN Yong. Optimization design of multi-lane stereo garage and research on vehicle access strategy[J]. Chinese Journal of Engineering Design, 2021, 28(4): 443-449.
[2] WANG Yan, LIU Jing-yu, LI Guang, ZHANG Jia-bo, LIU Xing, ZHOU Xin-xin. Design of navigation control system of AGV based on IGPS and Mecanum wheel[J]. Chinese Journal of Engineering Design, 2020, 27(5): 662-670.
[3] YAO Jia-ling, TANG Zheng, BAI Ya-nan. Coordinated control of roll and smoothness of vehicle based on shear magnetorheological damper[J]. Chinese Journal of Engineering Design, 2020, 27(2): 191-198.
[4] YUAN Kai, LIU Yan-jun, SUN Jing-yu, LUO Xing. Research on control of underwater manipulator based on fuzzy RBF neural network[J]. Chinese Journal of Engineering Design, 2019, 26(6): 675-682.
[5] DUAN Zhi-qiang, GUO Yan-qing, WANG Long. Research on high precision control of large inertia special turntable[J]. Chinese Journal of Engineering Design, 2019, 26(2): 162-169.
[6] HU Jun-feng, LI Yong-ming, ZHENG Chang-hu. Position precision compensation method of a micro-manipulation stage based on fuzzy control[J]. Chinese Journal of Engineering Design, 2018, 25(2): 123-130.
[7] XIE Miao, LIU Zhi-xiang, MAO Jun. Research on control strategy of parking tower hydraulic system and its power-saving technology[J]. Chinese Journal of Engineering Design, 2017, 24(1): 115-120.
[8] LI Fu-gui, LONG Wei, LUO Liang, ZHAN Cong-lai. The application of predictive fuzzy control in the liquefied natural gas peak-shaving system[J]. Chinese Journal of Engineering Design, 2016, 23(1): 95-100.
[9] LIU Zhi-guang, YU Fei, ZHANG Liang, LI Tie-jun, AN Zhan-fa. Force tracking research for robot based on fuzzy adaptive impedance control algorithm[J]. Chinese Journal of Engineering Design, 2015, 22(6): 569-574.
[10] Lv Kuan-zhou1, CHEN Su-xia2, HUANG Quan-zhen1. Flexible manipulator trajectory tracking and vibration fuzzy control[J]. Chinese Journal of Engineering Design, 2015, 22(1): 78-83.
[11] WAN Xiao-Feng, LEI Ji-Tang, YI Qi-Jun, JIA Jin-Xue, ZHANG Yan-Fei, DING Mao. Clutch engaging control of AMT for starting based on speed feedback[J]. Chinese Journal of Engineering Design, 2013, 20(5): 441-445.
[12] GU Xing, ZHONG Ming, YAO Yu-Feng. Position control for sampling arm based on self-adapting fuzzy-PID[J]. Chinese Journal of Engineering Design, 2012, 19(5): 385-390.
[13] GUO Kong-Hui, SUI Ji-Kui, SONG Xiao-Lin, GUO Yao-Hua, XUE Bing. Analysis of fuzzy sky hook semi active control method for high speed railway vehicle lateral damper[J]. Chinese Journal of Engineering Design, 2012, 19(3): 174-181.
[14] WANG Lin-Lin, HU Hui-Yi, TIAN Hui-Yi, TANG Xing-Lun. Application of selfadaptive fuzzy control on the automatic verticality control of rotary drilling rig[J]. Chinese Journal of Engineering Design, 2011, 18(4): 298-302.
[15] HUANG Qiang, DING Zhi-Hua, WU Chong-Jun, LIU Xin. Fuzzy control with heterogeneous distribution membership function for
fluctuation in fuel pressure
[J]. Chinese Journal of Engineering Design, 2007, 14(6): 478-481.